Edina Garage Door Repair Expert
A technician mounting a new garage door opener rail and motor unit to the ceiling of a residential garage

Opener installation · Edina, MN

Garage Door Opener Installation

We fit a new opener to your existing door at your Edina home, set the travel limits, aim the safety sensors and test the reversal before we leave.

CALL NOW: (952) 299-5920
  • Licensed and insured
  • Upfront quote before work
  • Parts-and-labor warranty

About the job

What garage door opener installation involves

Garage door opener installation replaces the motor unit that raises and lowers your door, or adds one to a door that has been run by hand. A new opener is a good time to fix what made the old one struggle, because the opener is only as good as the door it lifts.

We start by testing the door. With the old opener disconnected, a balanced door stays at waist height and lifts with little effort. If it does not, the springs or cables need attention first, since a new motor working against a heavy door will wear out quickly. Then we mount the header bracket, hang the rail from the ceiling, connect the trolley arm to the door, wire the wall control and set up the safety sensors near the floor.

Openers come in chain, belt and screw drive types, and the choice affects noise and maintenance. Belt drives run quietly, which helps when a bedroom sits over the garage. Chain drives are sturdy and common. We also match motor strength to door weight, especially for heavy insulated or wood doors.

Finally, we program the remotes and keypad, set the open and close limits, and adjust the force. The last step is the safety reversal check: the door must reverse when it meets an obstruction, and the sensors must stop it from closing on anything in its path.

CALL NOW: (952) 299-5920
A technician connecting the trolley arm of a new garage door opener to the top section of a garage door

Before you choose

What to decide before a new opener goes in

Chain, belt or screw drive

Chain drives are durable and simple. Belt drives are quieter. Screw drives have fewer moving parts. We explain the trade-offs for your garage.

Motor strength

A heavy insulated door needs a stronger motor than a light single-layer one. We size the motor to the door.

Remotes, keypad and wall control

We set up the remotes you want and a keypad for entry. The keypad has plain unmarked buttons that you program with your own code.

Safety sensors

Modern openers come with a pair of eyes mounted near the floor. We aim them and test that the door stops and reverses if anything crosses the beam.

Door condition

If your door has worn springs or a bent track, we flag it. Our garage door spring repair work can be done on the same visit.

Brands we fit

We install LiftMaster and Genie openers, and we replace units that have outlived repair.

CALL NOW: (952) 299-5920

Step by step

How an opener installation goes

  1. 01

    Step 01

    You call and describe the door

    Tell us about the door, how old the current opener is and what you want from the new one.

  2. 02

    Step 02

    We come out and check the door

    A technician tests the balance, checks the springs and track, and looks at the ceiling and wiring.

  3. 03

    Step 03

    We explain the options and quote it

    You hear which openers suit the door and get an upfront quote before any work begins.

  4. 04

    Step 04

    We install it and test the safety reversal

    We mount the opener, program the remotes, set the limits and confirm the door reverses on contact.

CALL NOW: (952) 299-5920

Opener installation · Edina, MN

Old opener failing or door still run by hand? Tell us about the door and we will explain what fits.

CALL NOW: (952) 299-5920

New openers

New opener installations

  • A newly installed ceiling-mounted garage door opener with a rail over a closed residential door, tidy garage
  • A garage door safety sensor mounted on the track near the floor with its small indicator light on
  • A garage door keypad with plain buttons mounted outside beside the door

Opener FAQ

Garage door opener installation questions

Will a new opener work with my existing door?
In most cases yes. We check the door's balance and condition first, and fit the opener rail and bracket to suit it.
What is the difference between chain and belt drive?
Chain drives are sturdy and widely used. Belt drives run quieter, which matters if living space is next to or over the garage.
How long does an opener installation take?
A standard opener is usually installed in a single visit. Extra time may be needed if the door needs adjusting or the ceiling needs reinforcing.
How is the price worked out?
It depends on the opener type, the motor strength, the accessories and any door work needed. We give you an upfront quote before any work begins.
Can I install a garage door opener myself?
The mounting can be done by a capable homeowner, but the spring-loaded door and the safety reversal setup carry risk. We install and test it for you.
Is it worth repairing an old opener instead?
If the fault is small, such as a sensor or a remote, repairing it makes sense. If the opener is worn throughout, a new one is usually the better path. We compare both.
Is the installation covered by a warranty?
Yes. Our repairs and installations are backed by a parts-and-labor warranty.

Opener installation · Edina, MN

Need a new garage door opener?

Tell us about your door and what the old opener is doing. We will come out, check the door and explain the options and the price before any work starts.

CALL NOW: (952) 299-5920
  • Licensed and insured
  • Upfront quote before work
  • Parts-and-labor warranty